I ordered a camera for my pi zero w and got the wrong one. Can it be trimmed to fit the zero’s smaller connectors
Asked
Active
Viewed 520 times
1 Answers
6
The CSI port of the Zero W is smaller than that of the Pi 2 and 3. You will need an adapter cable to make it fit. I'd say it's rather complicated to DIY that.
See e.g. here: Raspberry Pi Zero Camera Adapter or Camera Cable - Raspberry Pi Zero edition and others.
... and some nice additional information about the pinout is to be found here.
Ghanima
- 15,958
- 17
- 65
- 125