Quick question. I have the latest Raspberry Pi (Model 3B+) and I just want to know if the output current of the 3.3 V supply has changed as I'm using a T-cobbler at the minute.
Asked
Active
Viewed 72 times
1 Answers
0
I had done quite a bit of research and testing on the circuitry introduced by the PiB+ which was used in later models - up to Pi3. The regulator which supplies 3.3V is rated at 1A, and tested up to 800mA - See Raspberry Pi Power Limitations
The Pi3B+ has a new regulator chip, the 3.3V supply regulator is rated at 1.5A, although I have not conducted any load testing. It may be able to supply more than the Pi3B, but is still limited by the PSU and polyfuse.
Milliways
- 62,573
- 32
- 113
- 225