I am using a raspberry pi 3 with eth0 connected to a router with no internet and wlan0 connected to a router with internet access. i want both the interfaces up. but right now only eth0 is up. I followed this link
as suggested my interfaces file looks like this
auto lo
iface lo inet loopback
auto eth0
allow-hotplug eth0
iface eth0 inet static
address 192.168.1.97
netmask 255.255.255.0
auto wlan0
allow-hotplug wlan0
iface wlan0 inet static
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
address 192.168.1.115
netmask 255.255.255.0
broadcast 192.168.1.255
gateway 192.168.1.1
iface default inet dhcp
And /etc/default/ifplugd looks like this
INTERFACES="eth0"
HOTPLUG_INTERFACES="eth0"
ARGS="-q -f -u0 -d10 -w -I"
SUSPEND_ACTION="stop"
After changing this I also entered these commands
sudo /etc/default/ifplugd eth0 --kill
sudo ifup wlan0
This was working for Raspberry pi 1 but it is not working for Raspberry pi 3. Please help
