6

Need the right configuration to set the standards for the config.txt file to set an PAL LCD 1080p.

I have tried hdmi_group set to 0, to use the preferred group. That tweak gave me sharp text although the LCD output in unscaled mode gave me a small output box screen in the centre of the LCD.

I also set these parameters that gave the same output, small centre box in unscaled LCD mode. In auto-zoom LCD mode the image did fill out the screen, although I get the sense that it leaves out to much when viewing a web page for example, just as it does in unscaled LCD mode. 

sdtv_mode=2
hdmi_group=2
hdmi_mode=82

The correct configuration for a 16:9 PAL 1920x1080- 60Hz are:

sdtv_mode=2
sdtv_aspect=3
hdmi_group=1
hdmi_mode=16
disable_overscan=1
nicoX
  • 303
  • 1
  • 4
  • 10

1 Answers1

2

I changed the config.txt located at /boot, including the following statement:

hdmi_mode=16

I also had to change overscan_left and overscan_right.

I used the method of trial and error to find the right numbers for the overscan.

Toothbrush
  • 199
  • 1
  • 9
Victor
  • 31
  • 5