-2

i got an error avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00 An error occurred while uploading the sketch

can esp8266anyone rectify this

jcnmuoiefcvmbnoia jvhdnivoujfn
  • 1
  • 1
  • 3

1 Answers1

0

oh i got the solution for the above question

it might be because i used TX AND RX pins of the arduino. what i observed is as tx and rx pins are for serial communication pin during the process of uploading i have to leave that pins disconnected.arduino

jcnmuoiefcvmbnoia jvhdnivoujfn
  • 1
  • 1
  • 3